Error Handling; Error Recovery - Printrex C930 Bulldog User Manual

Error Handling

Error Recovery

Abort Printing
Color Printer/Plotter
If an error occurs, the printer will stop, the Ready indicator will go dark and the Error
indicator will flash the appropriate error code. If the error was caused by Paper,
Ribbon or Open, the associated indicator will also be lit.
The Error Codes are two digit numbers represented by a long flash(es) (tens digit)
and a short flash(es) (ones digit).
Paper Empty
Printer Open
Top of Form Error
Head Error
PCI Error
Ribbon Error
System Error
Starvation
Forced Abort
If the printer is opened to correct a problem, the Paper and Ribbon indicators will
turn off and the Open indicator will be lit. After the problem is corrected and the
printer is closed, the Open indicator will go dark and the Error indicator will be lit.
Pressing the Feed/Resume switch causes the printer to recheck for error conditions,
set the ribbon drive parameters and resume printing any unfinished jobs including
the interrupted job which is restarted from the beginning.
Pressing the cancel switch causes the printer to delete the job that was interrupted
and continue printing as described in the paragraph above.
Pressing the Cancel button during printing will stop printing immediately and an error
is indicated.
11
12
45
46
47
48
49
51
52
9