Power And Data Connections - Printrex C930 Bulldog User Manual

Introduction
Power and Data
Connections
Power Up
Color Printer/Plotter
The power cable, USB cable and ethernet cable are included in the shipping carton
with the printer. Locations of the connectors on the printer are shown in Figure 1.
Rear Panel with Cover Removed
Ethernet Connector
USB Connector
IP Subnet Address Status LED
Figure 1. Rear panel connections and IP address switches
The C930 contains a personal computer running Windows CE so on power up, it
goes through a "boot" cycle like any personal computer.
All front panel indicators are initially turned on. Near the end of the boot cycle, the
indicators will cycle once and then the READY light will be lit if paper and ribbons
are properly loaded and no errors exist. Any print jobs in the printer are deleted on
power up initialization.
Rear Panel with Cover Installed
IP Address
Most Significant Digit
Rotary BCD Switch
IP Address
Least Significant Digit
Rotary BCD Switch
AC Power Input
IP Subnet Address Pushbutton Switch
2