Table of Contents
Advertisement
Paper Feed–
Front Panel
Color Printer/Plotter
1.
Printer should be turned on and show "OPEN" light on
and "ERROR" light flashing.
4.
Prepare for printing by pressing either "FFED/RESUME" button or "CANCEL" button. — If a plot
didn't finish, then that plot can be reprinted from the begining by pressing "FEED/RESUME" or
can be cleared by pressing "CANCEL".
Figure 6. Close printer
The front panel contains two switches (Feed/Resume and Cancel) and five LED indi-
cators ( Ready, Error, Paper, Ribbon and Open).
Pressing the Feed/Resume button when the printer is ready but is not printing will
advance paper until the button is released.
See the section on Error Handling for more information on the switches and indica-
tors.
2.
Lower handle slowly. Paper will
advance while closing door.
3.
Close latches.
7
Advertisement
Table of Contents
