Table of Contents
Advertisement
Load Paper and
Ribbons
Color Printer/Plotter
It is required to have power on and the printer initialized when loading paper or
changing ribbons as the printer adjusts the ribbon drive settings when the printer is
closed.
See Figures 3, 4, 5 & 6. The C930 requires paper with registration marks on the
back (non printing) side. Printrex part number 2316-0017.
A low ribbon condition (less than 200 feet) is indicated by flashing the front panel
Ribbon indicator. This is not treated as an error and operation continues.
Figure 3. Open printer
1.
Open latches.
2.
Lift handle with
both hands until
door clicks in up
position.
4
Advertisement
Table of Contents
