Advertisement
set-up and usage
q Assembling the Lil' Kick Scooter
Tools Needed: 10mm wrench and 13mm wrench
1
Align the holes on the handlebars and the stem. Insert handlebar bolts
into the top of the handlebar and through the stem. Install the washers and
nuts onto the bottom of the handlebar bolts. Tighten securely into place using
a 10mm wrench.
B
3
Insert the rear tube covers ((A) - See 13-1, page 4). Slide rear axle bolt (B)
through the frame and attach wheels to the end of the axle bolt. Insert washer
and lock nut and tighten securely using a 13mm wrench.
F
Remove
5
Remove the protective black
plastic cap from bottom of stem
and slide collar clamp cover (F) up
to the middle of the stem. Insert
the stem into the fork.
need Help? Visit our web site for replacement parts, product support and a list of authorized service centers
at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
a
6
Using a 13 mm wrench, tighten
the bolt on the collar clamp until
the handlebars are locked securely
into place. Slide the collar clamp
cover down over the collar clamp.
2
Place the handlebar pad over the
handlebars and secure tightly with the
velcro cover.
e
c
d
Remove
4
Insert plastic headset ((C) - See 8,
page 4) into the neck of the frame.
Remove the protective black plastic cap
from the top of the fork and slide one
plastic washer (D) onto the fork before
inserting the fork through the frame.
Insert second plastic washer (D) onto
the top of the fork and slide the collar
clamp (E) on top of washer.
3
Note: For further assistance,
please refer to page 4 for parts
brakedown.
a
B
c
d
e
F
Advertisement
