Related Manuals for Turbosound QLIGHT TQ-425
Summary of Contents for Turbosound QLIGHT TQ-425
- Page 1 QLIGHT SERIES TQ-425 USER MANUAL Turbosound Ltd. Star Road, Partridge Green West Sussex RH13 8RY England Tel: +44 (0)1403 711447 Fax: +44 (0)1403 710155 web: www.turbosound.com Issue 1.0 Copyright 2000 Turbosound Ltd.
-
Page 2: Table Of Contents
System Requirements........................5 Amplifier considerations........................5 Equalisation ............................6 Mounting and fixing.......................... 6 Choosing the best location ....................... 8 Maintenance ............................8 Appendix A: Technical Specifications....................9 Appendix B: Spares and Accessories....................9 Appendix C: Warranty........................10 TQ-425 manual page 2... -
Page 3: Thanks
Congratulations, you have just purchased a professional loudspeaker system from the renowned Turbosound range, designed to give you the best in audio quality and many years of reliable, trouble free operation. It offers superior audio quality, full technical documentation, and rigging and flying hardware options. -
Page 4: Features
The TQ-425 consists of two 4” voice coil, 15” low frequency drivers in a compact vented enclosure, optimally tuned to reproduce high sound pressure levels at bass and sub-bass frequencies. -
Page 5: System Requirements
QLight series System Requirements The TQ-425 is a passive (non-powered) loudspeaker system. It requires the use of one amplifier channel for correct operation. Frequency splitting between the low frequency enclosure and the mid-high frequency enclosure is accomplished by an external electronic crossover. The LMS-D6 loudspeaker management system is recommended for this purpose. -
Page 6: Equalisation
Mounting and Fixing A versatile range of mounting hardware is available for the TQ-425 that allows it to be used in a variety of ways, in either mobile applications or permanent installations. A top hat stand type fitting... - Page 7 This method offers a simple and cost effective method of flying single or multiple TQ-425 enclosures, with the load being taken through the steel strips rather than through the woodwork of the enclosure. Enclosures may be arranged in a vertical column by coupling the flying strips together using QL-75 quicklinks or shackles.
-
Page 8: Choosing The Best Location
To reinstate the drivers, simply reverse the above procedure making sure you observe the correct polarity when reconnecting the cables back into the terminals of the drive units. For any other servicing requirements please contact your Turbosound dealer or authorised service centre. -
Page 9: Appendix A: Technical Specifications
15” (381mm) LF loudspeaker RC-1518 Recone kit for LS-1518 MG-425 Replacement foam / metal grille Flying accessories FF-425L Flying strips (2 required per enclosure) for vertical orientation FF-425S Flying strips (2 required per enclosure) for horizontal orienation TQ-425 manual page 9... -
Page 10: Appendix C: Warranty
Turbosound Ltd. (Att: Customer Service), Star Road, Partridge Green, West Sussex RH13 8RY, England, or your local authorised Turbosound representative. - Page 11 QLight series Incidental and consequential damages Turbosound's liability is limited to the repair or replacement, at our option, of any defective product, and shall not be liable for any incidental and consequential damages including, without limitation, injury to persons or property or loss of use.
- Page 13 Turbosound Ltd. Star Road, Partridge Green West Sussex RH13 8RY England Tel: +44 (0)1403 711447 Fax: +44 (0)1403 710155 web: www.turbosound.com...
Need help?
Do you have a question about the QLIGHT TQ-425 and is the answer not in the manual?
Questions and answers