Operating Sequence; Washing Only - Zanussi WI 1018 N Instruction Booklet

Operating sequence

Washing only

Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C, with
the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door by pulling the catch outward.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment
If you wish to carry out the prewash, pour detergent
into the appropriate compartment marked
3. Measure out the additive
If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
.
.
15
4. Depress button
required
5. Select the temperature
Turn the dial to the required setting.
6. Select the required programme
Turn the programme selector dial clockwise to the
desired position (A if you wish to perform a
prewash).
7. Start the machine
Depress the ON/OFF button
will illuminate and the machine starts operating.
or if
: the mains-on light