Operating Sequence; Washing - Zanussi ZWD 12270 W User Manual

Operating sequence

Washing

possible. Close the door.
2. Measure out the detergent and the fabric
softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required,
pour it into the main wash compartment
and, if you wish to carry out the prewash
phase, pour it into the compartment marked
.
If required, pour fabric softener into the
compartment marked
must not exceed the «MAX» mark in the
drawer). Close the drawer gently.
3. Select the required programme
Off
Drying
Cottons 95°
Synthetics 60° Eco
Silk 60°
Mini 30' 40° Eco
Cold 40°
Hand Synthetics
Wash
50°
30°
Wool 40°
Special
Spin Easy Iron 40°
Drain 40°
Rinse 30°
Delicates
Drying
●
1. Load the laundry
Open the door by
carefully pulling the
door handle outwards.
Place the laundry in
the drum, one item at
a time, shaking them
out as much as
(the amount used
The selector dial is
divided into the
following sections:
Cottons,
●
Synthetics,
●
Delicates,
●
Special,
●
The green Start/Pause light starts to flash.
The selector dial can be turned either
clockwise or anticlockwise.
Position «Off» to Reset programme/Switching
OFF of the machine.
At the end of the programme the selector
dial must be turned to position «Off», to
switch the machine off.
IMPORTANT!
If you turn the programme selector dial to
another programme when the machine is
working, the red Start/Pause pilot light will
flash 3 times and the message Err is displayed
on the display to indicate a wrong selection.
The machine will not perform the new selected
programme.
4. Select the spin speed or No Spin
Rinse Hold option
ZWD 12270W - S
1200
900
700
ZWD 16270W
1600
900
700
proposed by the appliance. The relevant light
will light up.
Maximum speeds are:
or
ZWD 14270W
1400
900
700
Press the «Spin»
button repeatedly to
change the spin
speed, if you want
your laundry to be
spun at a speed
different from the one
15