Operating Sequence; Place The Laundry In The Drum; Measure Out The Detergent; Select The Temperature - Zanussi WDS 1092 Instruction Booklet

i

Operating sequence

Automatic washing and drying
(non-stop programme)
This option is only possible for cottons and
synthetics.
Maximum load:
– cotton, linen 2.25 kg
– synthetics 1.50 kg
Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C,
with the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main
wash compartment and start up the machine.

1. Place the laundry in the drum

Open the door.
Place the laundry in the drum, one item at a
time, shaking them out as much as possible.
Close the door.

2. Measure out the detergent

Pull out the dispenser drawer until it stops.
Measure out the amount of detergent
recommended by the manufacturer in a
graduated cup and pour it into the main wash
compartment .
If you wish to carry out the prewash, pour
detergent into the appropriate compartment
marked .
3. Measure out the additives
If required, pour fabric softener into the
compartment marked
compartment marked
the «MAX» mark.

4. Select the temperature

Turn the dial to the required setting.
34
, and bleach into the
without exceeding
P0004
P0266
P0222
P0450