Operating Sequence; Washing Only - Zanussi WD 802 User Manual

Operating sequence

Washing only

Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C, with
the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
P0004
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment
If you wish to carry out the prewash, pour detergent
into the appropriate compartment marked
3. Measure out the additive
If required, pour fabric softener into the compartment
marked and the bleaching agent into the
compartment marked , without exceeding the
«MAX» mark.
C0075
.
.
C0076
4. Depress button
5. Select the temperature
Turn the dial to the required setting.
M0045S
6. Select the required programme
Turn the programme selector dial clockwise to the
desired position.
M0046
7. Start the machine
Depress the ON/OFF button
will illuminate and the machine starts operating.
P0080
15
if required
: the mains-on light