Handling Bar-Code Reader; Connecting The Bar-Code Reader; Detaching Bar-Code Reader; Using A Bar-Code Reader - Casio Cassiopeia IT-2000 User Manual

Handling Bar-Code Reader

Connect the bar-code reader to the Data Collector's bar-code reader connector.
There are two models of bar-code reader: pen scanner DT-9650BCR, touch scanner DT-
9656BCR.

Connecting the bar-code reader

1
Turn the power on the Data Collector off.
Open the cover of the bar-code reader
connector.
2
Insert the plug of the bar-code reader into the
connector as shown on the picture.

Detaching bar-code reader

Turn the power on the Data Collector off. Unplug the bar-code reader connector.

Using a bar-code reader

<Pen scanner>
1 Bar code scanning angle
Reading power: 0.19 mm (for PCS value of 0.85)
Wand position
Angle (up to 45 degrees)
Effective angle
Cover
E-31