Control Panel And Functions - Zanussi ZDF211 User Manual

156999310en.qxp 11/28/2005
Never use the dishwasher if the electrical
●
supply cable and water hoses are damaged;
or if the control panel, work top or plinth area
are damaged such that the inside of the
appliance is freely accessible. Contact your
local Service Force centre, in order to avoid
hazard.

Control panel and functions

Programme selector dial and
Programme selector
dial On/Off switch
and
Start/Cancel
button
4
2:27 PM Pagina 4
Delay start button
On/Off switch
when in this position, the machine is switched off (corresponding light off),
●
when the marker on the dial corresponds with a programme, the machine
●
is switched on and a programme is selected (corresponding light on)
Starting the washing programme:
●
1. Select a washing programme.
2. Press the Start/Cancel button (corresponding light on).
IMPORTANT!
Once the programme has started, if you want to change the selection made
you must cancel the washing programme in progress.
Cancel the washing programme in progress:
●
1. Press and hold the Start/Cancel button until the corresponding light
turns off.
2. Release the Start/Cancel button.
3. Turn the programme selector dial to the Off position or select a new
washing programme (check that there is detergent in the detergent
dispenser).
All sides of the dishwasher must never be
●
drilled to prevent damage to hydraulic and
electric components.
WARNING!
For electrical and water connection carefully
follow the instructions given in specific
paragraphs.
End of programme light
Start/Cancel button
Salt refilling light