Firepower FP-78 Operating Manual page 33

7/8"- 200 volt air plasma cutting power supply
Table of Contents

Advertisement

Cover Screws
(5 Places On Each Side)
A-01680
Figure 5-2 Cover Removal
3. Carefully pull the Cover up and away from the
unit to gain access to the inside of the unit.
4. To reinstall the Cover reverse the above proce-
dure.
B. Fuse Replacement
1. Remove the Cover per paragraph "A" above.
2. Locate the internal fuse above the input power
contactor on the left side of the unit.
3. Replace the fuse (0.8 amp, 600V).
4. Reinstall the Cover per paragraph "A" above.
Manual 0-2700
Cover
Figure 5-3 Internal Fuse Location
27
Internal Fuse
A-01692
0.8 Amps, 600V
SERVICE

Advertisement

Table of Contents
loading

Table of Contents