Mains Fuses Of The Lo-Power Amplifiers (Channel A/B); Mains Fuses Of The Hi-Power Amplifiers (Channel A/B); Ground-Lift Switch; Grounding Screw - Dynacord PM2600 Owner's Manual

Dual active 2-way powermax controlled amplifier

Hide thumbs Also See for PM2600:

Table of Contents

Available languages

Mains Fuses Of The LO-Power Amplifiers (Channel A/B)

The left fuse protects the power supply of the LO-power amplifiers in both amplifier channels A and B.

The right fuse protects the power supply of the MID-HI power amplifiers in both amplifier channels A and B.

This switch separates the enclosure electrically from the ground potential which helps in preventing "noi-

se-loops". Noise-loops result from several devices being connected to the ground via mains plugs, when

installed in a rack-system via direct metal contact, and through the screen of connected LF-signal lines.

The grounding screw is located next to the ground-lift switch. When the PM2600 is included within a rack-

shelf system, this screw is meant for the connection of an "earth bar". Whenever several devices are in-

stalled in a rack-system, they should be connected to a common ground, since their lacquered front panels

prevent a perfect galvanic inter-connection between enclosures.

Table of Contents