Video Connections - Yamaha DVD-S2700 Owner's Manual

o
• Digital connections
If you want to use the Dolby Digital, DTS or MPEG
function on your AV receiver, connect HDMI <A> or
DIGITAL (COAXIAL) <B> or DIGITAL (OPTICAL)
<C> jack of this unit to the corresponding input jacks of
your AV receiver using a commercially available HDMI,
digital coaxial or digital optical cable.
See "HDMI jack <A>" on page 12 about HDMI
connection.
This unit (U.K. and Europe models)
This unit has HDMI, composite video, S-video,
component video and SCART output jacks. If your AV
receiver has video output jacks, connect your receiver and
then your TV so that you can use one TV for several
different video sources (LD, VCR etc.) by simply
switching the input source selector on your receiver.
Use the one that corresponds to the input jacks on the
component to be connected.
<E>
TV
~> <B~
[!l
VI~"O
AV..:.-----~-~
receiver
L--------~J
This unit (U.K. and Europe models)
R6tes
• If you make a connection with DIGITAL (COAXIAL) <B> or
DIGITAL (OPTICAL) <C>, set [Digital Out] to [All] (see
"Setting the digital output" on page 28).
• If the audio format of the digital output does not match the
capabilities of your receiver, the receiver produces a distorted
sound or no sound at all. Make sure to select the appropriate
audio format from the menu screen on the disc.
Pressing AUDIO on the remote control once or more may
change not only the audio languages but also the audio format.
• SA-CD audio signals are not output from DIGITAL
(COAXIAL/OPTICAL) jacks.
• If you want to enjoy Dolby Digital, DTS, and MPEG formats,
you must connect this unit to an AV receiver that supports
these formats.
11
En
o
• Digital connections
If you want to use the Dolby Digital, DTS or MPEG
function on your AV receiver, connect HDMI <A> or
DIGITAL (COAXIAL) <B> or DIGITAL (OPTICAL)
<C> jack of this unit to the corresponding input jacks of
your AV receiver using a commercially available HDMI,
digital coaxial or digital optical cable.
See "HDMI jack <A>" on page 12 about HDMI
connection.
This unit (U.K. and Europe models)
This unit has HDMI, composite video, S-video,
component video and SCART output jacks. If your AV
receiver has video output jacks, connect your receiver and
then your TV so that you can use one TV for several
different video sources (LD, VCR etc.) by simply
switching the input source selector on your receiver.
Use the one that corresponds to the input jacks on the
component to be connected.
<E>
TV
~> <B~
[!l
VI~"O
AV..:.-----~-~
receiver
L--------~J
This unit (U.K. and Europe models)
R6tes
• If you make a connection with DIGITAL (COAXIAL) <B> or
DIGITAL (OPTICAL) <C>, set [Digital Out] to [All] (see
"Setting the digital output" on page 28).
• If the audio format of the digital output does not match the
capabilities of your receiver, the receiver produces a distorted
sound or no sound at all. Make sure to select the appropriate
audio format from the menu screen on the disc.
Pressing AUDIO on the remote control once or more may
change not only the audio languages but also the audio format.
• SA-CD audio signals are not output from DIGITAL
(COAXIAL/OPTICAL) jacks.
• If you want to enjoy Dolby Digital, DTS, and MPEG formats,
you must connect this unit to an AV receiver that supports
these formats.
11
En