Installation Instructions Epicure Outdoor Grill ® Models: OB36, OBS36, OB52, OBS52, OBSB162 TesTed in accordance wiTh The laTesT ediTion of ANSI Z21.58 2006 ● cSA 1.6-2006 StANdArd for outdoor cookINg gAS ApplIANceS. IN cANAdA: INStAllAtIoNS MuSt Be IN AccordANce WItH tHe curreNt cAN/cg A-B149.1.
If you have questions or problems with installation, con- lems, read these installation instructions completely tact your Dacor dealer or the Dacor Customer Service and carefully before you begin the installation process. Team. When you call, have the model and serial num- Leave these installation instructions with the customer.
Cut or remove the third (ground) prong from accompanying it. All other service should be done the power cord. by a qualified service technician. Contact the Dacor ◊ Use an adapter plug. Customer Service Team at (800) 793-0093, or at ◊...
Page 5
EVACUATE AND CALL THE of grease and grime. FIRE DEPARTMENT. • • In the event of a power failure, use the Dacor sup- NEVER PICK UP A FLAMING PAN - you may be plied match light tool. burned. •...
Page 7
Planning the Installation 9 1/8" *** (232mm) 23 3/4" 16" (603mm) (406mm) 26 1/2" (673mm) 27" ** oBsB162 (686mm) ** Total depth from back to front of knobs is 28 5/8” (727mm) *** Total height with cover is 12” (305mm) Cut-Out for Outdoor Grill Overall Height Overall...
Planning the Installation Location Planning - General warning • Gas and Electric Power Requirements This installation must conform to local codes or, in the absence of local codes, with either the National • Prior to installation, the gas supply for natural gas or Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural whole house LP installations must meet the specifica- Gas and Propane Installation Code, CSA B149.1, or...
See page 8 for overall cabinet dimensions the electric plug can be disconnected easily during ser- vice. oB36, oBs36, oB52 and oBs52 Optional Finish Trim Kits cutout dimensions - Side View The optional finish trim can be installed on the countertop to finish the sides and back of the countertop opening.
Page 10
Planning the Installation Location Planning - Enclosed Cabinets (continued) 6" x 6" 6" x 7" (152mm x 152mm) (152mm x 178mm) utility cutout utility cutout for OBSB162 12 1/4" (311mm) Coutertop 24" 25" (610mm) (635mm) 3/8" (10mm)ø Both sides OB(S)36 - 33 1/2" (851mm) OB(S)52 - 49 1/2"...
Planning the Installation Location Planning - Cart Installations • • Maintain all minimum clearances shown between the For proper grill and drawer operation, use the outdoor appliance and all surfaces behind and to the side of the grill and cart only on a level surface. appliance.
Installation Instructions Parts List warning Models oB36, oBs36, oB52 & oBs52: • Before installing the appliance, make sure the elec- Drip tray Rotisserie rod and forks trical and gas (on tank-less installations) service meets the requirements specified in the Planning...
Page 13
Installation Instructions whole house natural gas or lp cylinder regulator lp cylinder regulator lp regulator oBs162, oB36, oBs36 oB52, oBs52 (pn 72310) (pn 101578)
Remove the cart from the shipping pallet before instal- lation. The Dacor cart ships assembled ready for oBs36 installation of the outdoor grill. Set the cart in an open location and lock the wheels on the cart to minimize movement.
Page 15
Installation Instructions Optional Side Shelf Installation Slide the slot on the inside of the shelf over the pin on the mounting bracket. Install the front mounting bracket for the right side shelf. Use two (2) of the provided button head fasten- ers and two (2) lock washers.
(included) connect to outdoor grill lp regulator and hose assembly (included) pn 72310 for oBsB162, oB36, oBs36 pn 101578 for flexible gas line (not included) oB52, oBs52 Gas Connection - Whole House LP Gas Connect the factory supplied regulator assembly to the gas inlet at the back right bottom corner of the appli- ance.
Installation Instructions Final Assembly and Test Assemble the Side Burner - Some Models Put the burner heads on to the burner bases. Line up Assemble the Grill the slots on each head with the pins on the base so that it lies flat. Put the burner caps on top of the burner Open the hood on the unit.
Installation Instructions Final Assembly and Test (cont.) For units that will use a LP cylinder, start by making sure the main valve is completely closed. LP Cylinder Installation - Some Models Place the tank into the final position within the cabinet or cart.
If the grill still will not light, turn off the main gas line push to reset control valve or LP tank control valve and contact the Dacor Customer Service Team at (800) 793-0093, to schedule a service call. Installation Checklist warning •...
Need help?
Do you have a question about the Epicure OB36 and is the answer not in the manual?
Questions and answers