Installation Instructions Epicure Outdoor Grill ® Models: OB36, OBS36, OB52 OBS52, OBSB162 TesTed in accordance wiTh The laTesT ediTion of ANSI Z21.58 2006 ● cSA 1.6-2006 StANdArd for outdoor cookINg gAS ApplIANceS. IN cANAdA: INStAllAtIoNS MuSt Be IN AccordANce WItH tHe curreNt cAN/cgA-B149.1.
Email: customerservice@Dacor.com future reference and the local electrical inspector’s use. Web site: www.Dacor.com all specifications are subject to change without notice. dacor assumes no liability for changes to specifications. Important Safety Instructions Important Information About danGer Safety Instructions if you smell gas: shut off gas to the appliance.
Contact the • Use a power cord that is frayed or damaged. Dacor Customer Service Team at (800) 793-0093, or at www.Dacor.com for examination, repair or Keep the electrical cords away and gas supply lines adjustment.
Page 5
Do not line the appliance with aluminum foil or other ® In the event of a power failure, use the Dacor materials. These items can melt or burn up during supplied match lite tool. cooking Make sure this appliance is used only by those individuals who are able to operate it properly.
The fire department is being called. You can fight the fire with your back to an exit. Planning the Installation Product Dimensions 26" (660mm) 9 1/8" (232mm) 36" 23 3/4" (914mm) (603mm) 26 1/2" (673mm) 27 1/8" oB36 and (689mm) oBs36...
Planning the Installation Location Planning - General warninG • This installation must conform to local codes or, in Gas and Electric Power Requirements the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NFPA 54, Natural • Prior to installation, the gas supply for natural gas Gas and Propane Installation Code, CSA B149.1, or or whole house LP installations must meet the...
See page 8 for overall cabinet dimensions the electric plug can be disconnected easily during service. oB36, oBs36, oB52 and oBs52 Optional Finish Trim Kits cutout dimensions - Side View The optional finish trim can be installed on the countertop to finish the sides and back of the countertop opening.
Page 10
Planning the Installation Location Planning - Enclosed Cabinets (continued) 6" x 6" 6" x 7" (152mm x 152mm) (152mm x 178mm) Utility Cutout Utility Cutout for OBSB162 6” (152mm) 12 1/8" (308mm) 7” 25" (178mm) (635mm) 3/8" (10mm)ø Both sides OB(S)36 - 33 1/2"...
Page 11
Planning the Installation Location Planning - Cart Installations • For proper grill and drawer operation, use the outdoor • Maintain all minimum clearances shown between the appliance and all surfaces behind and to the side of the grill and cart only on a level surface. appliance.
Installation Instructions Parts List warninG Models oB36, oBs36, oB52 & oBs52: • Before installing the appliance, make sure the Drip tray Rotisserie rod and forks electrical and gas (on tank-less installations) service Smoker box Rotisserie motor meets the requirements specified in the Planning...
Page 13
Installation Instructions whole house natural Gas or lP regulator lP cylinder regulator lP cylinder regulator oBs162, oB36, oBs36 oB52, oBs52 (Pn 72310) (Pn 101578)
Remove the cart from the shipping pallet before oBsB162 oB36 or installation. The Dacor cart ships assembled ready for oBs36 installation of the outdoor grill. Set the cart in an open location and lock the wheels on the cart to minimize movement.
Page 15
Installation Instructions Optional Side Shelf Installation Slide the slot on the inside of the shelf over the pin on Install the front mounting bracket for the right side the mounting bracket. shelf. Use two (2) of the provided button head fasteners and two (2) lock washers.
(included) flexible Gas line (not included) Pn 72310 for Pn 101578 for oBsB162, oB36, oBs36 oB52, oBs52 Gas Connection - Whole House LP Gas Connect the factory supplied regulator assembly to the gas inlet at the back right bottom corner of the appliance.
Installation Instructions Final Assembly and Test Assemble the Side Burner - Some Models Assemble the Grill Put the burner heads on to the burner bases. Line up Open the hood on the unit. the slots on each head with the pins on the base so Insert the drip tray completely into the slot on the front that it lies flat.
Installation Instructions Final Assembly and Test (cont.) LP Cylinder Installation - Some Models For units that will use a LP cylinder, start by making sure the main valve is completely closed Place the tank into the final position within the cabinet warninG or cart.
Push the black button to reset. If the grill still will not light, turn off the main gas line control valve or LP tank control valve and contact the Dacor Customer Service Team at (800) 793-0093, to schedule a service call. Installation Checklist...
Need help?
Do you have a question about the Epicure OB36 and is the answer not in the manual?
Questions and answers