Final Assembly And Test - Dacor Epicure OB36 Installation Instructions Manual

Final Assembly and Test

Assemble the Grill
1. Open the hood on the unit.
2. Insert the drip tray completely into the slot on the front
of the unit.
3. Put the flame spreaders on the floor of the appliance,
inside the hood. The large holes go toward the front
of the unit. The holes are used to light the burners in
case of power failure. Push the spreaders as far to the
right as possible, leaving an opening on the left for the
smoker box.
4. Install the grills on the shelves above the flame
spreaders. Push the grills as far to the right as
possible, leaving an opening on the left for the smoker
box.
5. Insert the smoker box into the opening to the left side
of the grills.
6. Place the warming rack on the holders on the walls in
side the hood.
5 smoker Box
Installation Instructions
4
Grills
3 flame spreaders
Assemble the Side Burner - Some Models
7. Put the burner heads on to the burner bases. Line up
the slots on each head with the pins on the base so
that it lies flat. Put the burner caps on top of the burner
heads. Line up the slots on each cap with the pins on
the base so that it lies flat.
8. Put the grate over the top of the side burner. Line up
the legs with the dimples on the top of the side burner
chassis.
2 drip Tray
9
Burner cover
8 Grate
7 Burner heads & caps
1 open hood
6 warming rack