CycleOps PowerTap SL Owner's Manual page 30

4) The PowerTap can be used as a cycle computer or heart rate monitor.
PRO
Press [SELECT] to toggle through mode options.
watts
4
mi
watts, mi, and (heart icon) = power meter mode
mi, and (heart icon) = cycle computer mode
(heart icon) = heart rate monitor mode
Press [MODE] to save.
5) Press [SELECT] to toggle through auto start options.
PRO
watts
4
mi, and data = allows trip time to count when wheel speed is registering.
mi
Trip time stops 3 sec. after if speed is not registered.
data
(
registered. This function is useful in the transition from cycling to running
and vice versa.
Press [MODE] to save.
6) Press [SELECT] then [MODE] to reset default settings. Press [MODE] to
save changes.
), and data = allows trip time to count as long as a heart rate signal is
30