General Computer Operation; Display Levels; Display Modes; Buttons - CycleOps PowerTap SL Owner's Manual

General Computer Operation

DISPLAY LEVELS

The computer has three (3) main display levels:
Top
Middle
Bottom
Display
NOTE: These locations only apply to trip and
interval modes and does not apply to Cycle
or Heart Rate Monitor
to customize display options.

DISPLAY MODES

The computer has two (2) main modes of operation:
1) Trip
2) Interval
Hold [MODE] to toggle between display modes.

BUTTONS

There are two (2) buttons on the computer:
1) [Mode]
2) [Select]
NOTE: [BRACKETED] words indicate buttons.
There are five (5) types of button presses:
1) Press [MODE] or [SELECT] - a single press and release of either [MODE] or [SELECT].
• Power
• Speed
• Multi-Function
Function. See COMPUTER SETUP 4
TRANS.
ICON
INTERVAL
DISPLAY
Computer
MODE (LEFT)
Changes active
mode
POWER
DISPLAY
SPEED
DISPLAY
MULTI
DISPLAY
BOTH SELECT (RIGHT)
Select function
Clear data
Enter setup
12