Engine Stop Switch; Engine Shut-Off Switch - Yamaha FX High Output WaveRunner 2008 Owner's/Operator's Manual

Features and functions
NOTE:
While the engine is running, input from the
G
remote control transmitter is not received.
Refer to local hazardous waste regulations
G
when disposing of transmitter batteries.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including in-
terference that may cause undesired opera-
tion.
ECJ00030
CAUTION:
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authori-
ty to operate the remote control transmit-
ter.
EJU31150

Engine stop switch

Push the engine stop switch (red button) to
stop the engine normally.
1 Engine stop switch
EJU31160

Engine shut-off switch

Insert the clip, on the end of the engine shut-
off cord, under the engine shut-off switch
(black button). The engine will stop automati-
cally when the clip is removed from the
31
switch, such as if the operator falls off the wa-
tercraft.
1 Clip
2 Engine shut-off cord
3 Engine shut-off switch
EWJ00010
WARNING
Always attach the engine shut-off cord
G
to your left wrist and the clip to the en-
gine shut-off switch BEFORE starting
the engine.
To prevent accidental starting of the en-
G
gine or unauthorized use by children or
others, always remove the clip from the
engine shut-off switch when the engine
is not running.