Right Multifunction Display And Operation Buttons (For Fx Cruiser High Output) - Yamaha FX High Output WaveRunner 2006 Owner's/Operator's Manual

EJU22280
Right multifunction display
and operation buttons (for FX
Cruiser High Output)
The right multifunction display shows the
following information.
G Compass
G Average speed
G Tripmeter
G
Trip timer
G Fuel consumption per hour
G Fuel consumption per kilometer/mile
G
Water temperature
G Air temperature
The following operation buttons are on the
right side of the multifunction meter.
1 "Mode/Reset" button
2 "Start/Stop" button
To switch the display mode, push the
"Mode/Reset" button 1 for less than 1 sec-
ond. The display mode changes in the fol-
lowing order.
Compass → Average speed → Tripmeter
→ Trip timer → Fuel consumption per hour
→ Fuel consumption per kilometer/mile →
Water temperature → Air temperature
NOTE:
@
G
To switch the display units between kilo-
meters/liters/degrees Celsius and miles/
gallons/degrees Fahrenheit, push the
"Volt/Hour" button 3 for at least 1 second,
within 10 seconds after the multifunction
meter starts operating.
G The "SPEED" indicator light blinks three
times if miles/gallons/degrees Fahrenheit
are selected as the display units when the
multifunction meter starts operating, or if
the display units of the meter are switched
to miles/gallons/degrees Fahrenheit.
@
2-31
E