Yamaha FX High Output WaveRunner 2006 Owner's/Operator's Manual page 31

1 Fuel tank filler cap
2 Intake grate
Prevents debris from getting into the jet pump.
3 Speed sensor
4 Stern eye
Use to attach rope for transporting or mooring.
5 Stern drain plugs
Use to drain water in the bilge when the water-
craft is on dry land.
6 Reverse gate
Controls direction of jet thrust when in reverse.
7 Ride plate
8 Jet thrust nozzle
Changes the direction of jet thrust according
to handlebar position.
9 Reboarding step (for FX Cruiser High Out-
put)
Use to board the watercraft in water.
0 Electric bilge pilot outlet
A Cleat
Use to attach a towrope for pulling water-skier,
or a rope for mooring the watercraft.
B Handgrip
Use for support when boarding the watercraft
or when seated facing rearward and acting as
a spotter for a water-skier.
2-2
E