Yamaha XLT1200 WaveRunner 2003 Owner's/Operator's Manual page 30

1 Engine stop switch
Push to stop the engine normally.
2 Clip
Insert into the engine shut-off switch to enable
starting of the engine.
Remove to stop the engine or prevent acci-
dental starting of the engine or unauthorized
use of the watercraft.
3 Quick Shift Trim System (QSTS) selector
Use to select the trim angle of the watercraft.
4 QSTS shift lock lever
5 Engine shut-off switch
Remove the clip to stop the engine and dis-
able it from starting.
6 Start switch
Push to start the engine.
7 Fuel cock knob
Use to select either normal or reserve fuel flow
from the fuel tank to the carburetors, or to shut
off fuel flow.
8 Choke knob
Use to start a cold engine.
9 Engine shut-off cord (lanyard)
Attach to wrist so that the engine stops if the
operator falls off the watercraft.
0 Adjustable rearview mirrors
A Multifunction meter
Use to check watercraft operation.
B Shift lever
Use to put the watercraft into forward or
reverse.
C Throttle lever
Use to accelerate and decelerate.
D Tilt lever
Use to adjust the tilt of the handlebars.
E Glove compartment
2-3
E