Stopping The Watercraft - Yamaha XLT1200 WaveRunner 2003 Owner's/Operator's Manual

EJU01850

Stopping the watercraft

The watercraft is not equipped with a sep-
arate braking system. It is stopped by water
resistance when
released. From full speed, the watercraft
comes to a complete stop in approximately
110 m (360 ft) after the throttle is released
and the engine is stopped, although this dis-
tance will vary depending on many factors,
including gross weight, water surface condi-
tions, and wind direction. The watercraft
slows down as soon as the throttle lever is
released, but will coast for a distance before
fully stopping. If you are not sure you can
stop in time before hitting an obstacle, apply
throttle and turn in another direction.
WARNING
@
G Allow adequate stopping distance.
G Take early action to avoid collisions.
Remember, watercraft and other boats
do not have brakes.
G Operate defensively at safe speeds
and keep a safe distance away from
people, objects, and other watercraft
to give you time to stop.
G Do not shut the engine off when slow-
ing down in case you need engine
power to steer away from a boat or
other obstacle that comes into your
path.
G Do not use the reverse function to
slow down or stop the watercraft as it
could cause you to lose control, be
ejected, or impact the handlebars.
@
3-30
E
the throttle lever is