Yamaha XLT1200 WaveRunner 2003 Owner's/Operator's Manual page 29

1 Fuel tank filler cap
2 Rope holes
3 Intake grate
Prevents debris from getting into the jet pump.
4 Speed sensor
5 Cleat
Use to attach a towrope for pulling water-skier,
or a rope for mooring the watercraft.
6 Handgrip
Use for support when boarding the watercraft
or when seated facing rearward and acting as
a spotter for a water-skier.
7 Reverse gate
Controls direction of jet thrust when in reverse.
8 Stern drain plugs
Use to drain water in the bilge when the water-
craft is on dry land.
9 Jet thrust nozzle
Changes the direction of jet thrust according
to handlebar position.
0 Ride plate
2-2
E