Engine Oil Meter; Clock - Yamaha XLT1200 WaveRunner 2003 Owner's/Operator's Manual

EJU01228

Engine oil meter

The engine oil meter is provided for con-
venient oil level checking while operating the
watercraft.
The engine oil meter has 3 segments
which show the amount of oil remaining in
the oil tank.
NOTE:
@
The indication of the segments differs
depending on your operating condition. Use
the meter as a reference.
@
EJU01229

Clock

A 12-hour clock is provided in this meter.
To show the clock, press the "MODE" but-
ton until the display shows "CLOCK" while
the engine is running.
1. When the display shows "CLOCK," press
the mode button for at least 3 seconds.
2. The buzzer will sound once. The hour
display and "SET" start blinking. Then
press the "A/SET" button until the
desired hour is displayed.
3. Press the "MODE" button again.
4. The buzzer will sound once. The minute
display and "SET" start blinking. Then
press the "A/SET" button until the
desired minute is displayed.
5. Press the "MODE" button again.
2-25
E