Clutch Lever - Yamaha Royal Star XVZ13CTV Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS
Dimmer switch "
Set this switch to "
beam and to " " for the low beam.
Turn signal switch "
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
3
turn, push this switch to "
leased, the switch returns to the center
position.
Since this model is equipped with a
self-canceling system, the turn signal
lights will self-cancel after the vehicle
has traveled both about 150 m (490 ft)
and for approximately 15 seconds.
However, the turn signal lights can also
be canceled manually by pushing the
switch in after it has returned to the cen-
ter position.
NOTE:
The self-canceling system only oper-
ates when the vehicle is moving, so that
the turn signal lights will not self-cancel
while you are stopped at an intersec-
tion.
EAU12400
/ " Horn switch "
" for the high Press this switch to sound the horn.
Engine stop switch "
EAU12430
/ " Set this switch to "
the engine. Set this switch to "
stop the engine in case of an emergen-
". When re- cy, such as when the vehicle overturns
or when the throttle cable is stuck.
Start switch "
Push this switch to crank the engine
with the starter.
CAUTION:
See page 5-1 for starting instruc-
tions prior to starting the engine.
Cruise control switches
See page 3-5 for an explanation of the
cruise control system.
EAU12500
"

Clutch lever

EAU12660
/ "
" before starting
" to
EAU12710
1. Clutch lever
"
The clutch lever is located at the left
handlebar grip. To disengage the
ECA10050 clutch, pull the lever toward the handle-
bar grip. To engage the clutch, release
the lever. The lever should be pulled
rapidly and released slowly for smooth
clutch operation.
The clutch lever is equipped with a
EAU12780
clutch switch, which is part of the igni-
tion circuit cut-off system. (See page
3-19.)
3-7
EAU12820