Cruise Control System - Yamaha Royal Star XVZ13CTV Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Cruise control system

This model is equipped with a cruise
control system designed to maintain a
set traveling speed.
Activating and setting the cruise
control system
3 The cruise control system can only be
activated when riding in 4th or 5th gear
at speeds between 50 km/h (30 mi/h)
and 130 km/h (80 mi/h).
To activate and set the cruise control
system:
1. Push the "CRUISE" switch to the
"ACT" (activate) position and then
release the switch. The "ON" indi-
cator light will come on.
EAU35161
1. "CRUISE" switch
2. Cruise control switch
3. "CANCEL" switch
2. Press the "SET/DEC" (set/deceler-
ate) side of the cruise control
switch to activate the cruise control
system. The "SET" indicator light
comes on.
3. Set the desired traveling speed as
follows. Press the "RES/ACC" (re-
sume/accelerate)
cruise control switch to increase
the set speed or the "SET/DEC"
side to decrease the speed.
1. "ON" indicator light
2. "SET" indicator light
NOTE:
Pressing the cruise control switch once
will change the speed in increments of
1.6 km/h (1 mi/h). Holding the cruise
control switch down will increase or de-
crease the speed continuously until the
switch is released.
side of the
The traveling speed can be set to a
maximum of 130 km/h (80 mi/h) and a
minimum of 50 km/h (30 mi/h).
When the cruise control system is acti-
vated and the throttle grip is turned to
increase the speed by up to 8 km/h (5
mi/h), the cruise control system will re-
turn to the set speed after the throttle
grip is released. However, if the speed
3-5