Tail/Brake Light; Replacing A Turn Signal Light Bulb; Replacing A License Plate Light Bulb - Yamaha Road Stan XV17AT Owner's Manual

Tail/brake light

This model is equipped with an LED
type of tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU24180
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1. Screw
2. Remove the defective bulb by
pushing it in and turning it counter-
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw.
CAUTION:
Do not overtighten the screw, other-
wise the lens may break.
EAU24201
Replacing a license plate light
bulb
1. Remove the license plate light unit
1. Bolt
2. Remove the license plate light
ECA11190
6-36
by removing the bolts.
socket (together with the bulb) by
turning it counterclockwise, and
then pulling it out.
EAU31961
6