Adjusting The Valve Clearance; Tires (For Spoke Wheel Model) - Yamaha Road Stan XV17AT Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR

Adjusting the valve clearance

The valve clearance changes with use,
resulting in improper air-fuel mixture
and/or engine noise. To prevent this
from occurring, the valve clearance
must be adjusted by a Yamaha dealer
at the intervals specified in the periodic
maintenance and lubrication chart.
6
EAU21400

Tires (For spoke wheel model)

To maximize the performance, durabil-
ity, and safe operation of your motor-
cycle, note the
regarding the specified tires.
Tire air pressure
The tire air pressure should be checked
and, if necessary, adjusted before each
ride.
WARNING
G
The tire air pressure must be
checked and adjusted on cold
tires (i.e., when the temperature
of the tires equals the ambient
temperature).
G
The tire air pressure must be ad-
justed in accordance with the
riding speed and with the total
weight of rider, passenger, car-
go, and accessories approved
for this model.
6-17
EAU32520
Tire air pressure (measured on cold
tires):
0–90 kg (0–198 lb):
following points
90–194 kg (198–428 lb):
Maximum load*:
EWA10500
194 kg (428 lb)
* Total weight of rider, passenger, car-
go and accessories
WARNING
Proper loading of your vehicle is im-
portant for several characteristics of
your vehicle, such as handling,
braking, performance and safety. Do
not carry loosely packed items that
can shift. Securely pack your heavi-
est items close to the center of the
vehicle, and distribute the weight
evenly from side to side. Properly
adjust the suspension for your load,
and check the condition and pres-
sure of your tires. NEVER OVER-
Front:
250 kPa (36 psi) (2.50 kgf/cm²)
Rear:
250 kPa (36 psi) (2.50 kgf/cm²)
Front:
250 kPa (36 psi) (2.50 kgf/cm²)
Rear:
280 kPa (41 psi) (2.80 kgf/cm²)
EWA10510