Yamaha Venture XVZ13TFT Owner's Manual page 52

AUDIO SYSTEM AND CB RADIO
3. Repeatedly push either side of the
up/down switch for less than one
second until the desired preset
number ("1" through "6") is dis-
played.
NOTE:
Selecting "A" will automatically pro-
gram the preset stations. See the fol-
lowing section.
4 4. Push the "SELECT" button once
for less than one second to store
the radio station selected in step 1
under the preset number selected
in step 3.
5. Repeat this procedure to preset
other radio stations.
Using automatic tuning
1. Select a frequency band. (See the
"Selecting a frequency band" sec-
tion.)
2. Push the "SELECT" button once
for two seconds or more. The radio
frequency and preset station num-
ber "1" (to the right of "CH.") start
flashing.
3. Push either side of the up/down
switch once for one second or
more to tune in a station automati-
cally.
4. Repeatedly push either side of the
up/down switch for less than one
second until the desired preset
number ("1" through "6") is dis-
played.
5. Push the "SELECT" button once
for less than one second to store
the radio station selected in step 3
under the preset number selected
in step 4.
6. Repeat this procedure to preset
other radio stations.
Programing preset radio stations
automatically
4-14
Up to six stations can be programmed
automatically for each frequency band
(FM1, FM2, FM3, and AM) as follows.
NOTE:
This function works best in areas with
strong radio signals.
1. Select a frequency band. (See the
"Selecting a frequency band" sec-
tion.)
2. Push the "SELECT" button once
for two seconds or more. The radio
frequency and preset station num-
ber "1" (to the right of "CH.") start
flashing.
3. Repeatedly push either side of the
up/down switch for less than one
second until "A" (automatic) ap-
pears in the display.