Drive Select Switch; Engine Stop Switch - Yamaha PZ50RTX Owner's Manual

Control functions
1. Warning light "
2. Self-diagnosis warning indicator "
3. Two-digit error code
EWS00650
WARNING
If the self-diagnosis warning indicator and
warning light flash continuously, and an
error code is displayed during operation,
there may be some problem with an elec-
trical circuit, couplers, etc.
Note the error code, and then have a
Yamaha dealer inspect the snowmobile as
soon as possible in order to avoid engine
damage.
ESU10540

Drive select switch

The drive select switch is used to shift the
snowmobile into drive or reverse. After com-
ing to a complete stop, press the drive select
switch.
The drive "D" indicator light comes on when
the transmission is in drive (forward).
The reverse "R" indicator light comes on when
the transmission is in reverse.
16
"
"
1. Drive select switch
2. Drive "D" indicator light
3. Reverse "R" indicator light
ECS00050
CAUTION:
Do not shift from drive to reverse or from
reverse to drive while the snowmobile is
moving. Otherwise, the drive system
could be damaged.
ESU10530

Engine stop switch " "

The engine stop switch is used to stop the en-
gine in an emergency. Simply push the stop
switch to stop the engine. To start the engine,
pull the stop switch and proceed with starting
the engine. (See pages 33 for engine starting
procedures.)
1. Engine stop switch"
During the first few rides, practice using the
stop switch so that you can react quickly in an
emergency.
"