Air Intake Restrictor Plate Removal - Yamaha GRIZZLY 80 Owner's Manual

NOTE:
The air filter element should be cleaned every
20-40 hours. It should be cleaned and lubricated
more often if the machine is operated in
extremely dusty areas. Each time air filter ele-
ment maintenance is performed, check the air
inlet of the air filter case for obstructions. Check
the air cleaner rubber joint to the carburetor and
manifold fittings for an airtight seal. Tighten all
fittings securely to avoid the possibility of unfil-
tered air entering the engine.
cC
Never operate the engine with the air filter
element removed. This will allow unfiltered
air to enter the engine, causing rapid engine
wear and possible
Additionally, operation without the filter ele-
ment will affect carburetor jetting with sub-
sequent poor performance and possible
engine overheating.
engine damage.
EBU01035

Air intake restrictor plate removal

To obtain full engine performance capability,
removing the air intake restrictor plate is
required.
1. Remove the air filter element. (See page
8-11 for removal and installation procedures.)
2. Remove the air intake restrictor plate.
1. Air intake restrictor plate
8-14
1