Cable Inspection And Lubrication; Brake And Shift Pedal/Brake Lever Lubrication - Yamaha GRIZZLY 80 Owner's Manual

7. Install the left footboard by installing the
screws and bolts, and then tighten the
bolts to the specified torque.
Tightening torque:
10 Nm (1.0 m0kgf, 7.2 ft0lbf)
EBU00356

Cable inspection and lubrication

q WARNING
POTENTIAL HAZARD
Damaged control cables.
WHAT CAN HAPPEN
Corrosion can result when the outer cov-
ering of control cables becomes damaged.
Cables can also become frayed or kinked.
Operation of controls could be restricted,
which could cause an accident or injury.
HOW TO AVOID THE HAZARD
Inspect cables frequently. Replace dam-
aged cables.
Lubricate the inner cables and the cable ends. If
the cables do not operate smoothly, ask a
Yamaha dealer to replace them.
Recommended lubricant:
Yamaha chain and cable lube or
SAE 10W30 motor oil
EBU00727

Brake and shift pedal/brake lever lubrication

Lubricate the pivoting parts of each lever and
pedal.
Recommended lubricant:
Lithium-soap-based grease
(all-purpose grease)
8-25