Special Safety Precautions; Description Of The Appliance - Binatone MRHB-8805 Instruction Manual

SPECIAL SAFETY
PRECAUTIONS
Before turning the appliance on for the first
time, make sure that all components of the blender
have been properly installed.
Do not apply too much force when installing
the blender attachment, as it may result in the
breakage of the appliance and in the termination
of the warranty.
If a smell of burning, foreign sounds or power reduction occur
during the blending process, immediately unplug the appli-
ance from the outlet and clean the blender. If the blender still
malfunctions after cleaning, contact an authorized service cen-
ter.
It is recommended that original factory packaging should be
used for the transportation of the blender in order to prevent
its parts from breaking.
If the ingredients are hot, allow them to cool before blending
(maximum temperature: 80
the blender.
Never use the blender to blend paints or solvents.
Do not attempt to remove any ingredients when the blender is
in operation.
Always turn the appliance off before removing the attach-
ment.
The continuous operation of the blender should last for no
more than 1 minute and should be then interrupted for at least
1 minute.
The blades of the blender are very sharp. Never touch the
blades of the blender.
Turn the blender on only after it has been fully assembled.
Always check whether the appliance has been properly as-
sembled before each use.
DESCRIPTION OF THE
APPLIANCE
Figure A:
1. Blender Body
2. Low Rotation Speed Controller
3. High Rotation Speed Controller
4. Attachment
5. Power Supply Cord
0 C). Never blend hot fat or oil with
5