Advertisement
Available languages
Available languages
9. If water goes cool, and you want to re-boil (or heat) it again,
turn the kettle on again.
CARE AND CLEANING
1. Before cleaning or storing disconnect the kettle
2. To avoid electrical shock, do not place the
damp lint free cloth. You can use non-abrasive cleansers.
3. To clean the filter (4),
filter should be cleaned regardless of whether you can see scale
on it or not.
4. Assemble the appliance only after its parts are completely dry.
USEFUL RECOMMENDATIONS
sary to remove scale from the appliance regularly
to keep it in good working order, since excessive
scale in the appliance may cause its incorrect op-
eration or breakdown. Frequency of cleaning de-
pends on the degree of tap water hardness in your
region and on frequency of the kettle use (for ex-
ample, one cleaning after 200 times of use). If water in your house
is hard, we recommend filtering it – it will decrease scale deposit.
2 ways to remove scale:
Using 9% white vinegar:
Using 9% white vinegar:
Using 9% white vinegar:
Using 9% white vinegar:
Using 9% white vinegar:
– Fill the kettle with 0.5 liter of hot water and add 2 table-spoons
of 9% white vinegar.
– Let the kettle soak for 1 hour without boiling.
– Stir the liquid in the kettle from time to time.
– Pour out the liquid and wash it out 2-3 times with cold clean
water.
With the help of citric acid:
With the help of citric acid:
With the help of citric acid:
With the help of citric acid:
With the help of citric acid:
– Mix 25 g of citric acid and 0.5 l of hot water in the kettle.
– Leave the kettle for 15 minutes.
– Regularly stir the solution.
! Pour the solution out of the kettle and rinse it two or three times
with cold tap water.
! Repeat the procedure if necessary.
Any other works should be performed in the authorized service
center.
Do not store the appliance if it is hot or connected to the network.
If you do not use the appliance, put it in a box after cooling and
store in a safe, dry place, out of children's reach.
from the mains supply and wait till it cools
completely.
body of the kettle (1),
trical cord in water. These parts of the appli-
ance can be cleaned with the help of a
(4), take it out and wash it with water. The
(4),
(4),
(4),
In regions with high water hardness it is neces-
5 5 5 5 5
(1),
(1),
(8)
(8)
(1), its base (8)
(1),
(8) and elec-
(8)
Advertisement
