Table of Contents
Advertisement
DSL-X11 User Manual
Click "Configure System Log" to show the following interface. You can enable or
disable the system log and then select the log level, display level and mode, and
click "Apply" to end your configurations.
Both the log level and display level have eight choices. The default log level is
"Debugging" and the default display level is "Error".
The mode options are "Local", "Remote", and "Both". The default option is
"Local".
If you select "Remote" or "Both", all events are transmitted to the specified UDP
port of the specified log server.
67
Advertisement
Table of Contents
