Table of Contents
Advertisement
protect the network against hacker attacks and block access of individual PC to
selected services or Internet websites.
Choose Security > IP Filtering > Outgoing and the following page appears.
By default, all outgoing IP traffic from LAN is allowed, but some IP traffic can be
blocked by setting up filters.
Click Add and the page for defining the IP filtering rule appears.
In this page, you can create a filter rule to identify outgoing IP traffic by specifying
a new filter name and at least one condition. All specified conditions in the
filtering rule must be complied with the rule to take effect.
Click Save/Apply to save and activate the filter.
Filter Name: Enter the name of outgoing filter rule.
Protocol: Select one from TCP/UDP, TCP, UDP, and ICMP protocols.
DSL-X11 User Manual
46
Advertisement
Table of Contents
