Asus DSL-X11 User Manual page 31

3.4.1.4 Adding an IPoA PVC
This section describes the procedure for adding PVC 0/38 (IPoA mode).
Click Add and the following page appears.
In this page, you can modify VPI/VCIs, service categories.
Country: Select the Country from the drop-down list.
ISP: Select the ISP according to the country from the drop-down list. If you
do not find the ISP that matches the country, you can select Others.
VPI: Virtual path between two points in an ATM network. Its valid value
range is from 0 to 255.
VCI: Virtual channel between two points in an ATM network. Its valid value
range is from 32 to 65535 (1 to 31 are reserved for known protocols).
DSL-X11 User Manual
28