Table of Contents
Advertisement
Select the required application from the Select an application drop-down list, or
manually enter the information in the Custom application field.
Trigger Port Start and Trigger Port End: Enter the port that is to be
monitored for outgoing data traffic.
Trigger Protocol: Select the protocol that is to be monitored for outgoing
data traffic.
Open Protocol: Select the protocol that is to be allowed for incoming data
traffic
Open Port Start and Open Port End: Enter the port that is to be opened
for incoming traffic.
Step 2
Click Save/Apply to apply the settings.
Removing Port Triggering
Step 1
Select the Remove check box.
Step 2
Click Remove button to apply the settings.
DSL-X11 User Manual
43
Advertisement
Table of Contents
