Table of Contents
Advertisement
DSL-X11 User Manual
PPP Username: The correct user name that your ISP provides to you.
PPP Password: The correct password that your ISP provides to you.
PPPoE Service Name: If your ISP provides it to you, please enter it. If not, do
not enter any information.
Authentication Method: The value can be AUTO, PAP, CHAP, or MSCHAP.
Usually, you can select AUTO.
Enable Fullcone NAT: A full cone NAT is one where all requests from the same
internal IP address and port are mapped to the same external IP address and
port. Furthermore, any external host can send a packet to the internal host, by
sending a packet to the mapped external address.
Dial on demand (with idle timeout timer): If this function is enabled, you need
to enter the idle timeout time. Within the preset minutes, if the modem does not
detect the flow of the user continuously, the modem automatically stops the
14
Advertisement
Table of Contents
