Swivel Seat Operation - Yamaha AR230 Owner's/Operator's Manual

2
F
EATURES
Accessory Outlet
There is a 12VDC outlet with resettable
circuit breaker located in the portside
console storage compartment.
12 VDC
BREAKER
Switch Circuit Breakers
The electrical circuit for each switch
is protected by a circuit breaker. If the
button below a switch pops out, push
it back in with your finger. If it pops
out again, ask your Yamaha dealer to
inspect the electrical system.
NOTE: There is also an accessory fuse
at the battery (see page
& F
UNCTIONS
STBD
PORT
1 2 3 4 5 6 7 8 9 10
4-16).
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
51 52 53 54 55 56 57 58 59 60

SWIVEL SEAT OPERATION

The driver's seat is two-way adjust-
able.
To move the seat forward or back,
pull up on the lever 1 located under
the front of the seat. Move the seat to
the desired position, then release the
lever.
To rotate the seat, first move the seat to
its fully forward position. Then, pull up
on the lever 2 located under the side
of the seat. Release the lever once you
begin to pivot. The seat will pivot freely
up to 180°, and will automatically lock
into the fully front-facing or rear-facing
position. There is also a friction lever 3
to adjust how easily the seat rotates.
The seat must always be locked into
the full front-facing position before get-
ting underway.
The seat bolster on AR and SX models
will flip up for a raised seating position.
2-16
1 2 3 4 5 6
11 12 13 14 15 1
1 2 3 4 5 6 7 8 9
21 22 23 24 25
11 12 13 14 15 16 17 18 1
31 32 33 34 35
21 22 23 24 25 26 27 28
41 42 43 44 45
31 32 33 34 35 36 37 38
51 52 53 54 55
41 42 43 44 45 46 47 48