Replacing The License Plate Light Bulb; Front Wheel - Yamaha FZ6 Owner's Manual

Replacing the license plate
light bulb
1. Remove the license plate light unit
by removing the screws.
1. Screw
2. License plate light unit
2. Remove the socket (together with
the bulb) by pulling it out.
PERIODIC MAINTENANCE AND MINOR REPAIR
EAU24310
1. License plate light bulb
2. License plate light bulb socket
3. Remove the defective bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by pushing it in.
6. Install the license plate light unit by
installing the screws.

Front wheel

To remove the front wheel
G
G
1. Place the vehicle on the center-
2. Loosen the front wheel axle pinch
1. Wheel axle
2. Front wheel axle pinch bolt
6-39
WARNING
It is advisable to have a Yamaha
dealer service the wheel.
Securely support the motor-
cycle so that there is no danger
of it falling over.
stand.
bolt, then the wheel axle and the
brake caliper bolts.
EAU24360
EAU43090
EWA10820
6