Replacing A Turn Signal Light Bulb - Yamaha FZ6 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing a turn signal light
bulb
1. Remove the turn signal light unit
by removing the screw.
1. Screw
6
2. Turn signal light unit
2. Remove the socket (together with
the bulb) by turning it counter-
clockwise.
EAU43000
1. Turn signal light bulb socket
3. Remove the defective bulb by pull-
ing it out.
1. Turn signal light bulb
4. Insert a new bulb into the socket.
5. Install the socket (together with the
bulb) by turning it clockwise.
6. Install the turn signal light unit by
installing the screw.
6-38
CAUTION:
Do not overtighten the screw, other-
wise the lens may break.
ECA11190