Front Wheel Installation; Rear Wheel Removal - Yamaha YBR 125K Owner's Manual

Front wheel installation

When installing the front wheel, reverse the removal
procedures.
Pay attention to the following points:
2. Make sure the slot in the brake shoe plate fits over
the stopper on the front fork outer tube.
3. Make sure the axle nut is properly torqued.
Axle nut torque:
45 N.m (4,5 Kgf.m, 32,5 lbf.ft)

Rear wheel removal

1. Nut 2. Cotter pin
CAUTION:
It is advisable to have a Yamaha dealer service the
wheel.
Securely support the motorcycle so there is no danger
of it falling over.
1. Place the motorcycle on the centerstand.
2. Remove the cotter pin and nut. Then remove the
tension bar from the brake shoe plate.
6-32
3. Tension bar