XPLORE TECHNOLOGIES GeneSys User Manual page 11

Docking
Connector Port
Certification
Label
Figure 1.3- Back and left side view of GeneSys II
Docking Connector Port
Sealed Battery
Compartment
Product Label
Certification Label
Antenna Port Hole
IRDA Lens
Figure 1.4- Top View of GeneSys II
IRDA Lens
Carry Handle Holes
Guide Pin Holes for
Docking
Antenna Port Hole
(optional)
October 2001
This port allows the GeneSys computer to dock to the Xpander and Quick Release docking
stations. More details are provided later in this manual.
Located behind the outer lower, left rubber grip is the battery compartment. Instructions are
provided later in this manual.
This label includes the product brand name and unit serial number as well as bar code.
The appropriate emissions and safety certification labels are strategically located on the
back of the tablet in pre-defined cut-out sections.
Carry Handle Holes
Guide Pin Holes for Docking
Infrared communication device that allows communications with other IRDA devices i.e.
computers, printers, PDAs.
These holes are used to affix the carry handle to the GeneSys tablet.
These holes are used as locators to ensure positive docking connections to the GeneSys
docking stations.
A cable, upon which an antenna will be mounted, exits this hole. This hole is integrated into
the GeneSys tablet when an internal wireless option is ordered.
Page 11
Sealed Battery
Compartment
Product
Label
P/N 96-000001-017, Version Q301