Operating Sequence; The Appliance - Westinghouse LF 651 D User Manual

Operating sequence

Before the first wash we recommend that you pour 2
litres of water into the main wash compartment
of the detergent drawer in order to activate the ECO
valve. Then run a cotton cycle at 60°C, with the
machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment
If you wish to carry out a program with prewash, pour
detergent into the appropriate compartment marked
.
Please do not use liquid detergent with this
appliance except if placed in the dosage
ball/device & at the back of the machine drum.
3. Measure out the additive
If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
.
4. Switch the machine on and select the
desired program
Turn the selector dial to the desired program to
switch the appliance on. The lights corresponding to
the different phases making up the selected program
light on.
To switch the appliance off turn it to OFF.
5. Select the spin speed or NO SPIN
option
Press the SPIN SPEED button repeatedly, in order
to select the desired spin speed or the NO SPIN
option. The relevant light will light up.
6. Select the desired options
The light corresponding to the depressed button
illuminates.
13