Table of Contents
Advertisement
BASIC OPERATION
VOLUME CONTROL
While you are on a call, press > to raise the inbound volume and < to lower it. The handset will
display the relative volume setting as you adjust it.
CHANNEL CHANGING
If you experience noise or interference while on a call, you
may be too far from the Base Unit, or in an obstructed area.
Try moving to a different location. If this does not improve
NOTE: This feature only operates while you are on an active call.
the transmissions, press PROG/CHAN. You can press this
key more than once, if necessary.
10
MAKING CALLS
Method 1------Live Dialing
Press PHONE. Dial the phone number.
Press OFF to end your call.
Method 2------Pre-dialing
Dial the phone number. Use the < key to back-
space if you make a dialing mistake. Then
press PHONE.
Press OFF to end your call.
When the handset is in use, the IN USE/
CHARGE light on the Base Unit will flash.
When the Handset is in the Base Unit cradle,
the IN USE/CHARGE light glows steadily.
Advertisement
Table of Contents
