Basic Telephone Operations; Area Code Programming - VTech VT 1932 Manual

BASIC TELEPHONE OPERATIONS

AREA CODE PROGRAMMING

To benefit from all the Caller ID features of your tele-
phone, you must enter your home area code.
If you live in an area where you dial calls within your
own area code by dialing 7 digits (no area code),
follow these steps (with the Handset OFF ):
• Press PROG.
• Press until AREA is blinking.
• Press SELECT.
• HOME should be blinking. If not, press
blinks.
• Press SELECT. ENTER AREA CODE is displayed.
• Enter your own home area code.
• Press SELECT.
LESS COMMON ALTERNATIVE
If you live in an area where all local calls require 10
digits (area code plus phone number, without dialing
"1" first:)
• Press PROG.
• Press until AREA is blinking.
• Press SELECT.
• HOME should be blinking. If not, press
• Press SELECT. ENTER AREA CODE is displayed.
• Enter 000.
• Press SELECT and continue below.
You may program up to 5 local area codes. An area code is "local" if you do not dial "1" when
you make calls to that area code. In other words, you make calls to "local" area codes by
dialing 10 digits (area code plus phone number) without a preceding "1". This might include
your own area code
• Press PROG.
• Press until AREA is blinking.
• Press SELECT.
• Press until LOCAL is blinking.
Press SELECT.
• Press until the desired location is blinking (#1.....#5).
• Press SELECT . ENTER AREA CODE is displayed.
• Enter a "local" area code.
• Press SELECT.
• Press OFF when finished.
NOTE: To replace or edit an existing area code, use the
existing digits, and enter the desired area code. Press SELECT when done.
LINE 1
1
4
GHI
7
PQRS
until it
TONE
HOLD
until it blinks.
9
SELECT
OFF LINE 2
2 3
ABC DEF
5
6
JKL MNO
8
9
TUV
WXYZ
0
OPER
PROG REDIAL/PAUSE
FLASH
CONF
INTERCOM
key to delete the